1. |
Install the washer reservoir.
|
2. |
Install the washer motor.
|
3. |
Install the washer hose.
|
4. |
Connect the washer motor connector.
|
5. |
Install the front bumper.
|
6. |
Check the washer motor operation.
|
Removal
In case of removing the high pressure fuel pump,
high pressure fuel pipe, delivery pipe, and injector, there may be injury
...
Removal
1.
Disconnect the battery negative cable and wait for at least 3
minutes before beginning work.
2.
Remove the roof trim.
(Refer to ...
Repair procedures
Component Replacement After Deployment
Before doing any SRS repairs, use the GDS to check for DTCs. Refer
to the Diagnostic Tr ...