1. |
Disconnect the negative(-) battery terminal.
|
2. |
Remove the glove box.
(Refer to the BD group - "Crash pad")
|
3. |
Remove the DRL unit (A) after disconnecting the connector and
loosening the mounting nut.
|
Rail Pressure Sensor (RPS). Specifications
Specification
...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the CCV connector.
3.
Measure resistance between the CCV termina ...
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Disconnect the variable intake solenoid valve connector
...