Hyundai Accent: Installation
| 1. |
Install the hazard lamp switch.
|
| 2. |
Connect the connectors.
|
| 3. |
Install the center fascia garnish.
|
| 4. |
Connect the negative (-) battery terminal.
|
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Using a screwdriver or remover, remove the center fascia garnish
(A).
...
Inspection
1.
Operate the switch and check for continuity between terminals.
...
See also:
Schematic Diagrams
Circuit Diagram
...
Removal and Installation
1.
Disconnect the battery negative terminal first, then
the positive terminal.
Tightening torque
(-) terminal :
4.0 ~ 6. ...
Wheel nut tightening torque
Steel wheel & aluminum alloy wheel:
65~79 lb·ft (9~11 kg·m)
If you have a tire gauge, remove the valve cap and check the air pressure. If
the pressure is lower than recommended, drive slowly ...
Hyundai Accent Manuals
© 2011-2024 Copyright www.hamanual.com