1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the lighting switch of the multi-function switch. (Refer
to the multifunction switch)
|
3. |
With the front fog lamp switch, make sure that continuity exists
between the terminals below.
If continuity is not as specified, replace the multi-function
switch.
|
Components and Components Location
Component Location
1. Driver power window main switch
2. Passenger power window switch
3. Front window motor
4. Rear window motor
5. Rear window switch
...
Intake Air Temperature
Sensor (IATS). Schematic Diagrams
Circuit Diagram
(M/T)
(A/T)
...
Description and Operation
Warning Lamp Activation
Warning Lamp Behavior after Ignition
On
As soon as the operating voltage is applied to the SRSCM ignition input,
the SRSCM activates the warning lamp fo ...