Hyundai Accent: Immobilizer Control Unit. Repair
procedures
Hyundai Accent RB (2010-2018) Service Manual / Body Electrical System / Immobilizer System / Immobilizer Control Unit. Repair
procedures
Replacement
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
|
| 3. |
Remove the BCM unit and the SMARTRA unit(A).
[USA]
|
| 4. |
Remove the SMARTRA unit (A) from the bracket with loosening a
shear bolt (B).
[CANADA]
|
| 5. |
Installation is the reverse of removal procedure.
|
Replacement
Problems And Replacement Parts:
Problem
Part set
GDS required?
All keys have been lost
Blank key (4)
YES
An ...
Antenna Coil. Repair procedures
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the steering column upper and lower shrouds (A) after removing
3 sc ...
See also:
Troubleshooting
Troubleshooting
1.
The lamp switch inputs can be checked using the GDS.
2.
To check the input value of lamp switch, select option "Body Co ...
Installation
1.
Installation is the reverse of removal.
2.
After installation, bleed the brake system. (Refer to Brake system
bleeding)
...
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Release the residual pressure in fuel line (Refer
to ...
Hyundai Accent Manuals
В© 2011-2024 Copyright www.hamanual.com