Replacement
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the steering column upper and lower shrouds (A) after removing
3 screws.
|
3. |
Disconnect the 6P connector (B) of the coil antenna and then remove
the coil antenna (A) after loosening the screw.
|
4. |
Installation is the reverse of removal procedure.
|
Repair procedures
Inspection
[System Inspection]
1.
Disconnect the vapor hose from the intake manifold
and connect a vacuum pump to the nipple on the intake manifold.
В· At Col ...
Inhibitor Switch. Specifications
Specifications
▷ Type: Combination of output signals from 4 terminals
Power supply (V)
12
Output type
Combination of output signals
...
Adjustment
Hood Adjustment
1.
After loosening the hinge (A) mounting bolt, adjust the hood (B)
by moving it up or down, or right or left.
2.
Adju ...