Hyundai Accent: Inspection
| 1. |
Disconnect the ignition switch connector (B) and key switch connector
(A) from under the steering column.
|
| 2. |
Check for continuity between the terminals.
|
| 3. |
If continuity is not specified, replace the switch.
|
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the steering column upper and lower shrouds.
(Refer to the ST group - & ...
See also:
Description and Operation
Description
Emissions Control System consists of three major systems.
•
The Crankcase Emission Control System prevents blow-by
gas from releasing into the atmosphere. T ...
Removal
1.
Remove the front wheel and tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
...
Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the glove box.
(Refer to the BD group - "Crash pad")
...
Hyundai Accent Manuals
В© 2011-2024 Copyright www.hamanual.com