Hyundai Accent: Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the steering column upper and lower shrouds.
(Refer to the ST group - "Steering column")
|
| 3. |
Disconnect the ignition switch connector (B) and the key switch
connector (A) from under the steering column.
|
| 4. |
If it is necessary to remove the key lock cylinder (A), remove
the key lock cylinder after pushing lock pin with key ACC.
|
Inspection
1.
Disconnect the ignition switch connector (B) and key switch connector
(A) from under the steering column.
2.
Check for continui ...
Installation
1.
Install the key lock cylinder.
When assembling, the key must be inserted at ...
See also:
Seat Heater Switch. Schematic Diagrams
Schematic Diagram
...
Components and Components Location
Components Location
1. Torsion beam axle
2. Shock absorber
3. Coil spring assembly
4. Rear disc
...
Low tire pressure telltale
When the tire pressure monitoring system warning indicator is illuminated, one
or more of your tires is significantly under-inflated.
If the telltale illuminates, immediately reduce your speed, a ...
Hyundai Accent Manuals
В© 2011-2024 Copyright www.hamanual.com