Hyundai Accent: Installation

Hyundai Accent RB (2010-2018) Service Manual / Body Electrical System / Ignition Switch Assembly / Repair procedures / Installation

1.

Install the key lock cylinder.

When assembling, the key must be inserted at 'ACC' position.

2.	Install the key warning and immobilizer connector.

3.	Install the ignition switch.

4.	Install the steering column shrouds and crash pad lower panel.

Removal

1. Disconnect the negative (-) battery terminal. 2. Remove the steering column upper and lower shrouds. (Refer to the ST group - & ...

See also:

To keep locks from freezing
To keep the locks from freezing, squirt an approved de-icer fluid or glycerine into the key opening. If a lock is covered with ice, squirt it with an approved de-icing fluid to remove the ice. If ...

Side Airbag (SAB) Module. Components and Components Location
Components ...

Removal
Front Speaker 1. Remove the front door trim panel. (Refer to the BD group - "Front door") 2. Remove the front speaker (A) ...

Hyundai Accent Manuals

© 2011-2024 Copyright www.hamanual.com