The support rod must be inserted into the hole near
the edge of the hood whenever you inspect the engine compartment to
prevent the hood from falling and causing possible injury.
Make sure that the support rod has been released
prior to closing the hood. Always check to be sure the hood is firmly
latched before driving the vehicle.
|
Interior overview
❈ The actual vehicle may differ from the illustration.
1. Door lock/unlock button
2. Outside rearview mirror control switch*
3. Central door lock switch*
4. Power window lock button*
5. ...
Removal
1.
Remove the front wheel and tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
...
Troubleshooting
Troubleshooting
Problem Symptoms Table
Use the table below to help you find the cause of theproblem. The numbers
indicate the priority of the likecause of the problem. Check each p ...