1. |
Oil seals
|
2. |
Gaskets
|
3. |
O-rings
|
4. |
Lock washers
|
5. |
Cotter pins (split pins)
|
6. |
Plastic nuts
Depending on their location.
|
7. |
Sealant should be applied to gaskets.
|
8. |
Oil should be applied to the moving components of
parts.
|
9. |
Specified oil or grease should be applied to the
prescribed locations (oil seals, etc) before assembly.
|
CVVT Oil Control Valve
(OCV). Specifications
Specification
Item
Specification
Coil Resistance (Ω)
6.9 ~ 7.9 [20°C(68°F)]
...
Anchor Pretensioner (APT). Description and Operation
Description
Front anchor pretensioner operates as well as Belt Pretensioner at the
same time If it gets into its deploy condition after a collision. It is located
at near anchor on driver se ...
Relay Box (Engine Compartment). Repair procedures
Inspection
Power Relay Test (Type A)
-
Do not use pliers.
-
...