Hyundai Accent: Electrical System
Hyundai Accent RB (2010-2018) Service Manual / General Information / Electrical System
| 1. |
Be sure to disconnect the battery cable from the
negative (-) terminal of the battery.
|
| 2. |
Never pull on the wires when disconnecting connectors.
|
| 3. |
Locking connectors will click when the connector
is secure.
|
| 4. |
Handle sensors and relays carefully. Be careful not
to drop them against other parts.
|
Replacement
Standard values, such as torques and certain adjustments,
must be strictly observed in the reassembly of all parts.
If removed, the following parts should always be replaced
with new ones ...
Rubber Parts And Tubes
Always prevent gasoline or from touching rubber parts or
tubing.
...
See also:
Replacement
Front Door Trim Replacement
•
Be careful not to scratch the door trim and other parts.
...
Components and Components
Location
Components
1. HECU module
2. Front wheel speed sensor
3. Rear wheel speed sensor
4. Yaw rate & Lateral G sensor
5. Steering angle sensor
6. ABS Warning l ...
CVVT Oil Control Valve
(OCV). Description and Operation
Description
Continuous Variable Valve Timing (CVVT) system advances or
retards the valve timing of the intake and exhaust valve in accordance with
the ECM control signal which is calculated ...
Hyundai Accent Manuals
В© 2011-2024 Copyright www.hamanual.com