Hyundai Accent: Dimensions Projected
Hyundai Accent RB (2010-2018) Service Manual / General Information / Dimensions Projected
| 1. |
These are the dimensions measured when the measurement
points are projected from the vehicle's surface, and are the reference
dimensions used for used for body alterations.
|
| 2. |
If the length of the tracking gauge probes is adjustable,
measure it by lengthening one of two probes as long as the different
value in height of the two surface.
|
Measuring Body Dimensions
1.
Basically, all measurements in this manual are taken
with a tracking gauge.
2.
When a measuring tape is used, check to be sure there
...
Measuring Actual Dimensions
1.
These dimensions indicate the actual linear distance
between measurement points, and are used as the reference dimensions
when a tracking gauge is used for measurem ...
See also:
Output Speed Sensor. Schematic Diagrams
Circuit Diagram
...
Engine compartment
1. Engine coolant reservoir
2. Windshield washer fluid reservoir
3. Radiator cap
4. Engine oil filler cap
5. Engine oil dipstick
6. Brake/clutch fluid reservoir
7. Air cleaner
8. Fuse box
9. ...
Installation
1.
Place the thermostat in the block.
Install the thermostat (B) with the jiggle valve
upward.
2.
Install the water inlet fitting ( ...
Hyundai Accent Manuals
В© 2011-2024 Copyright www.hamanual.com