Sprockets, Hydraulic Tensioner, Chain Guide, Tensioner Arm |
1. |
Check the CVVT sprocket, crankshaft sprocket teeth
for abnormal wear, cracks or damage. Replace if necessary.
|
2. |
Check a contact surface of the chain tensioner arm
and guide for abnormal wear, cracks or damage. Replace if necessary.
|
3. |
Check the hydraulic tensioner for its piston stroke
and ratchet operation. Replace if necessary.
|
1. |
Check the idler for excessive oil leakage, abnormal
rotation or vibration. Replace if necssery.
|
2. |
Check belt for maintenance and abnormal wear of V-ribbed
part. Replace if necssery.
|
3. |
Check the pulleys for vibration in rotation, oil
or dust deposit of V-ribbed part. Replace if necssery.
|
Description and Operation
Description
Ignition timing is controlled by the electronic control ignition
timing system. The standard reference ignition timing data for the engine operating
conditions are pre-programmed ...
Replacement
Problems And Replacement Parts:
Problem
Part set
GDS required?
All keys have been lost
Blank key (4)
YES
An ...
Installation
Rear Disc Brake Type
1.
Install the parking brake cable.
2.
Install the parking brake cable (A), and then install the clip
(B ...