|
1. |
Install the valves.
|
2. |
Using the SST(09222 - 3K000, 09222 - 3K100), compress
the spring and install the retainer locks.
After installing the valves, ensure that the retainer
locks are correctly in place before releasing the valve spring compressor.
|
3. |
Lightly tap the end of each valve stem two or three
times with the wooden handle of a hammer to ensure proper seating of
the valve and retainer lock.
|
4. |
Install the MLA(Mechanical lash adjuster)s.
Check that the MLA (A) rotates smoothly by hand.
|
Closing the tailgate
To close the tailgate, lower and push down the tailgate firmly. Make sure that
the tailgate is securely latched.
WARNING
Make sure your hands, feet and other parts of your body are safely out
o ...
Description and
Operation
Description
The Evaporative Emission Control System prevents fuel vapor
stored in fuel tank from vaporizing into the atmosphere. When the fuel evaporates
in the fuel tank, the vapor passes t ...
Inspection
•
Frequent inhalation of brake pad dust, regardless of material
composition, could be hazardo ...