|
1. |
Install the cylinder head assembly.
|
2. |
Place the cylinder head carefully not to damage the
gasket.
|
3. |
Install the cylinder head bolts with washers.
|
4. |
Install the oil control valve (OCV) (A).
|
5. |
Install the heater pipe (A).
|
6. |
Install the water temperature control assembly (B)
and connect the bypass hose (A).
|
7. |
Install the injector & rail assembly (A).
|
8. |
Install the intake and exhaust manifold.
(Refer to Intake and Exhaust system in this group)
|
9. |
Install the camshafts.
|
10. |
Install the camshaft bearing caps with the order
below.
|
11. |
Install the timing chain.
(Refer to Timing system in this group)
|
12. |
Install the OCV (Oil Control Valve) adapter (A).
|
13. |
Install the cylinder head cover (A) with a new gasket
(B).
|
14. |
Tighten the cylinder head cover bolts (A) with the
order and steps.
|
15. |
Install the exhaust OCV (Oil control valve) (A).
|
16. |
Install the ignition coils (A).
|
17. |
Install the high pressure fuel pump (A) and the roller
tappet (B). (Refer to FL group)
|
18. |
Install the high pressure pipe (A). (Refer to FL
group)
|
19. |
Install the vacuum pipe assembly (A).
|
20. |
Connect the fuel hose (A), the PCV (Positive crankcase
ventilation) hose (B) and the PCSV (Purge control solenoid valve) hose
(C).
|
21. |
Connect the brake booster vacuum hose (A) and heater
hoses (B).
|
22. |
Connect the wiring connectors and harness clamps,
and remove the wiring and protectors from the cylinder head and intake
manifold.
|
23. |
Connect the radiator upper hose (A) and lower hose
(B).
|
24. |
Install the under covers (A).
|
25. |
Install the battery tray (C), the ECM (B) and then
connect the ECM connectors (A)
|
26. |
Install the battery (A) and the mounting bracket.
|
27. |
Install the air cleaner assembly.
|
28. |
Connect the battery negative terminal (A).
|
29. |
Install the engine cover.
|
Install the engine cover.
|
Perform the following :
|
Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable from battery and wait for
at least three minutes befo ...
Binding arbitration
Any claim or dispute you may have related to your vehicle's warranty or the duties
contemplated under the warranty, including claims related to the refund or partial
refund of your vehicle' ...
Seat belt restraint system
WARNING
For maximum restraint system protection, the seat belts must always
be used whenever the car is moving.
Seat belts are most effective when seatbacks are in the upright position.
Ch ...