Hyundai Accent Manuals

Hyundai Accent: Inspection - Thermostat. Repair procedures - Cooling System - Engine Mechanical SystemHyundai Accent: Inspection

Hyundai Accent RB (2010-2018) Service Manual / Engine Mechanical System / Cooling System / Thermostat. Repair procedures / Inspection

1.
Immerse the thermostat in water and gradually heat the water.
2.
Check the valve opening temperature.
Valve opening temperature : 82±1.5°C (179.6±2.7°F)
Full opening temperature : 95°C (203°F)
If the valve opening temperature is not as specified, replace the thermostat.
3.
Check the valve lift.
Valve lift : 8mm(0.3in) or more at 95°C (203°F)
If the valve lift is not as specified, replace the thermostat.

Removal
Disassembly of the thermostat would have an adverse effect, causing a lowering of cooling efficiency. 1. ...

Installation
1. Place the thermostat in the block. Install the thermostat (B) with the jiggle valve upward. 2. Install the water inlet fitting ( ...

See also:

Purge Control Solenoid Valve (PCSV). Schematic Diagrams
Circuit Diagram (M/T) (A/T) ...

Battery. Components and Components Location
Components 1. Battery insulation pad 2. Battery 3. Battery tray 4. Battery mounting bracket 5. ECM & bracket assembly ...

Actual Measurement Dimensions ( 4Door )
Front side member tooling hole (Ø6.6) Side cover mounting hole (B/B’: Ø6.6/ Ø8.6) ...

Hyundai Accent Manuals


© 2011-2024 Copyright www.hamanual.com