Hyundai Accent: Installation
| 1. |
Place the thermostat in the block.
Install the thermostat (B) with the jiggle valve
upward.
|
| 2. |
Install the water inlet fitting (A).
|
| 3. |
Fill with engine coolant.
|
| 4. |
Start engine and check for leaks.
|
Inspection
1.
Immerse the thermostat in water and gradually heat
the water.
2.
Check the valve opening temperature.
...
Thermostat. Troubleshooting
Troubleshooting
Symptoms
Possible Causes
Remedy
Coolant leakage
•
From the thermostat gasket
...
See also:
Washer fluid
Checking the washer fluid level
The reservoir is translucent so that you can check the level with a quick visual
inspection.
Check the fluid level in the washer fluid reservoir and add fluid if ...
Auto door lock/unlock feature
All doors will automatically lock when the shift lever is moved out of P
(Park).
All doors will automatically unlock when the shift lever is moved into P
(Park).
...
Wheel nut tightening torque
Steel wheel & aluminum alloy wheel:
65~79 lb·ft (9~11 kg·m)
If you have a tire gauge, remove the valve cap and check the air pressure. If
the pressure is lower than recommended, drive slowly ...
Hyundai Accent Manuals
© 2011-2024 Copyright www.hamanual.com