Hyundai Accent Manuals

Hyundai Accent: Inspection - Water pump. Repair procedures - Cooling System - Engine Mechanical SystemHyundai Accent: Inspection

1.
Check each part for cracks, damage or wear, and replace the coolant pump assembly if necessary.
2.
Check the bearing for damage, abnormal noise and sluggish rotation, and replace the coolant pump assembly if necessary.
3.
Check for coolant leakage. If coolant leaks from hole, the seal is defective. Replace the coolant pump assembly and gasket.
A small amount of “weeping” from the bleed hole is normal.

Removal and Installation
Water Pump 1. Drain engine coolant. System is under high pressure ...

Water pump. Troubleshooting
Troubleshooting Water Pump Symptoms Possible Causes Remedy Coolant leakage • From the bleed hole ...

See also:

Troubleshooting
Troubleshooting Trouble Symptom Probable cause Remedy Vehicle pulls to one side Scoring of driveshaft ball joint Replace ...

Relay Box (Passenger Compartment). Components and Components Location
Components ...

Removal
1. Disconnect the negative(-) battery terminal. 2. Remove the glove box. (Refer to the BD group - "Crash pad") ...

Hyundai Accent Manuals


© 2011-2024 Copyright www.hamanual.com