Hyundai Accent: Inspection
Radiator Cap Testing
| 1. |
Remove the radiator cap, wet its seal with engine
coolant, then install it on a pressure tester.
|
| 2. |
Apply a pressure of 93.16 ~ 122.58kpa (0.95 ~ 1.25kg/cm²,
13.51 ~ 17.78psi).
|
| 3. |
Check for a drop in pressure.
|
| 4. |
If the pressure drops, replace the cap.
|
Radiator Leakge Test
| 1. |
Wait until engine is cool, then carefully remove
the radiator cap and fill the radiator with engine coolant, then install
it on the pressure tester (A).
|
| 2. |
Apply a pressure tester to the radiator and apply
a pressure of 93.16 ~ 122.58kpa (0.95 ~ 1.25kg/cm², 13.51 ~ 17.78psi).
|
| 3. |
Inspect for engine coolant leaks and a drop in pressure.
|
| 4. |
Remove the tester and reinstall the radiator cap.
|
Removal and Installation
1.
Disconnect the battery terminals. (Refer to Engine
and transaxle assembly in this group)
2.
Remove the air cleaner assembly. (Refer to E ...
See also:
Tilting the sunroof
To open the sunroof
Push the sunroof control lever upward until the sunroof moves to the desired
position.
To close the sunroof
Pull the sunroof lever downward until the sunroof moves to the de ...
Meaning Of Symbols
There are five primary symbols used to complement illustrations.
These symbols indicate the part to apply such materials during service.
Symbol
Meaning
...
35R Clutch Control Solenoid Valve(35R/C_VFS). Description and Operation
Description
35R clutch control solenoid valve(35R/C_VFS) is attached to the valve
body. This variable force solenoid valve directly controls the hydraulic pressure
inside the 35R clutch.
...
Hyundai Accent Manuals
В© 2011-2024 Copyright www.hamanual.com