Hyundai Accent Manuals

Hyundai Accent: Removal - Oil Pan. Repair procedures - Lubrication System - Engine Mechanical SystemHyundai Accent: Removal

Hyundai Accent RB (2010-2018) Service Manual / Engine Mechanical System / Lubrication System / Oil Pan. Repair procedures / Removal

1.
Remove the under covers (A).
Tightening torque:
6.9 ~ 10.8N.m (0.7 ~ 1.1kgf.m, 5.1 ~ 7.9lb-ft)

2.
Drain engine oil.
3.
Using the SST(09215-3C000) and remove the oil pan.

•
Insert the SST between the oil pan and the ladder frame by tapping it with a plastic hammer in the direction of arrow.
•
After tapping the SST with a plastic hammer along the direction of edge of the oil pan, remove it from the ladder frame. arrow around more than 2/3 edge of the oil pan, remove it from the ladder frame.
•
Do not turn over the SST abruptly without tapping. It be result in damage of the SST.

Oil Pan. Repair procedures
...

Installation
1. Install the oil pan. (1) Using a razor blade and gasket scraper, remove all the old packing material from the gasket surfaces. ...

See also:

Antenna Coil. Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the steering column upper and lower shrouds (A) after removing 3 sc ...

Components
1. Driver Airbag (DAB) 2. Steering Wheel 3. Clock Spring 4. Passenger Airbag (PAB) 5. Side Airbag (SAB) 6. Curtain Airbag (CAB) 7. Seat Belt Pretensioner ( ...

Brake Booster Operating Test
For simple checking of the brake booster operation, carry out the following tests. 1. Run the engine for one or two minutes, and then stop it. If the pedal depresses ...

Hyundai Accent Manuals


© 2011-2024 Copyright www.hamanual.com