On-vehicle Inspection
Spark Test |
1. |
Disconnect the connectors (A) and then ignition coils
(B).
|
2. |
Disconnect the injector extension connector for fuel
not to be injected while checking.
|
3. |
Using a spark plug socket, remove the spark plug.
|
4. |
Install the spark plug to the ignition coil.
|
5. |
Ground the spark plug to the engine.
|
6. |
Check if spark occurs while engine is being cranked.
|
7. |
Inspect all the spark plugs.
|
8. |
Using a spark plug socket, install the spark plug.
|
9. |
Install the ignition coil.
|
10. |
Reconnect the ignition coil connector.
|
1. |
Remove the ignition coils (A).
|
2. |
Using a spark plug socket, remove the spark plug.
|
3. |
Inspect the electrodes (A) and ceramic insulator
(B).
Inspection Of Electrodes
|
4. |
Check the electrode gap (A).
|
1. |
Measure the primary coil resistance between terminals
(+) and (-).
|
To increase cruise control set speed
Follow either of these procedures:
Push the RES+ switch and hold it. Your vehicle will accelerate. Release
the switch at the speed you want.
Push the RES+ switch and release it immediately. ...
Troubleshooting
Troubleshooting
Symptom
Suspect area
Engine will not start or struggle to start
Vapor hose damaged or disconnected
Engine strugg ...
Description
The Electronic Throttle Control (ETC) System consists of
a throttle body with an integrated control motor and throttle position sensor
(TPS). Instead of the traditional throttle cable, an Acc ...