Hyundai Accent: Removal and Installation
Hyundai Accent RB (2010-2018) Service Manual / Engine Electrical System / Charging System / Alternator. Repair procedures / Removal and Installation
| 1. |
Disconnect the battery negative terminal first, then
the positive terminal.
|
| 2. |
Loosen the mounting bolts (A,B)
|
| 3. |
Turn the adjusting bolt(B) clockwise in loose tension.
|
| 4. |
Remove the drive belt (A).
|
| 5. |
Disconnect the air compressor connector(A) and the
alternator connector (B), and remove the cable (C) from alternator "B"
terminal.
|
| 6. |
Remove the alternator(A).
|
| 7. |
Installation is the reverse order of removal.
|
| 8. |
Adjust the alternator belt tension after installation.
|
Disassembly
1.
Remove the rear cover (A).
2.
Loosen the mounting bolts(A) and disconnect the brush
holder assembly(B).
...
See also:
Components and Components Location
Component Location
1. Head lamp (Low / High)
2. Turn signal lamp
3. Front fog lamp
4. Position lamp
5. Turn signal lamp (Side repeater)
6. High mounted stop lamp
...
Description of ESC
Optimum driving safety now has a name : ESC, the Electronic Stability
Control.
ESC recognizes critical driving conditions, such as panic reactions in
dangerous situations, and stabili ...
Trunk Trim. Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
...
Hyundai Accent Manuals
© 2011-2024 Copyright www.hamanual.com