1. |
Remove the rear cover (A).
|
2. |
Loosen the mounting bolts(A) and disconnect the brush
holder assembly(B).
|
3. |
Remove the slip ring guide(A).
|
4. |
Remove the pulley(A) using the special tool.
|
5. |
Unsolder the 3 stator leads(A).
|
6. |
Loosen the 4 through bolts(A).
|
7. |
Disconnect the rotor(A) and bracket(B).
|
8. |
Reassembly is the reverse order of disassembly.
|
Engine Coolant Temperature
Sensor (ECTS). Description and Operation
Description
Engine Coolant Temperature Sensor (ECTS) is located in the
engine coolant passage of the cylinder head for detecting the engine coolant
temperature. The ECTS uses a thermistor th ...
Description
Automatic transaxle system relies on various measurement data to determine
the current control status and extrapolate the necessary compensation values.
These values are used to control the a ...
Components(1)
[Sedan]
1. Roof trim
2. Retainer
3. Sunvisor
4. Assist handle
...