1. |
Disconnect the battery terminals (A). Disconnect
the negative terminal first.
|
2. |
Remove the air duct and air cleaner assembly. (Refer
to EM group)
|
3. |
Remove the battery insulation pad (A).
|
4. |
Remove the battery (B) after removing the mounting
bracket.
|
5. |
Disconnect the ECM connectors (A) and then remove
the ECM (B) and the battery tray (C).
|
6. |
Installation is the reverse order of removal.
|
Owner maintenance precautions
Improper or incomplete service may result in problems. This section gives instructions
only for the maintenance items that are easy to perform.
As explained earlier in this section, several procedu ...
Seat Belt Buckle Switch (BS). Description and
Operation
Description
The SRSCM shall monitor the status of the driver and front passenger seat
belt buckle. The SRSCM provides one pin each for the driver and front passenger
seat belt buckle status ...
Specifications
Specification
Item
Resistance (Ω)
Driver Airbag (DAB)
1.7 ~ 2.3
Passenger Airbag (PAB)
1.7 ~ 2.3
...