1. |
Disconnect the battery negative terminal.
|
2. |
Remove the air duct and air cleaner assembly. (Refer
to EM group)
|
3. |
Disconnect the starter cable (B) from the B terminal
on the solenoid then disconnect the connector (A) from the S terminal.
|
4. |
Remove the 2 bolts holding the starter, then remove
the starter (A).
|
5. |
Installation is the reverse of removal.
|
6. |
Connect the battery negative terminal last.
|
Removal
1.
Disconnect the battery negative cable and wait for at least three
minutes before beginning work.
2.
Remove the glove box housing.
...
Inspection
1.
Check the components for damage or deformation.
2.
Compress and extend the piston and check that there is no abnormal
resistance or unus ...
Components and Components Location
Component Location
1. Horn switch
2. Horn relay (Engine room compartment)
3. Horn
4. Clock spring
...