Inspection
1. |
Remove the fuse box cover.
|
2. |
Remove the starter relay(A).
|
3. |
Using an ohmmeter, check that there is continuity
between each terminal.
|
4. |
Apply 12V to terminal 85 and ground to terminal 86.
Check for continuity between terminals 30 and 87.
|
5. |
If there is no continuity, replace the starter relay.
|
6. |
Install the starter relay.
|
7. |
Install the fuse box cover.
|
Installation
•
Thoroughly clean all parts to be assembled.
•
...
Installation
•
Install the component with the specified
torques.
•
...
Inspection
•
Frequent inhalation of brake pad dust, regardless of material
composition, could be hazardo ...