Inspection
1. |
After disconnecting the vapor hose from the PCV valve,
remove the PCV valve.
|
2. |
Reconnect the PCV valve to the vapor hose.
|
3. |
Run the engine at idle, then put a finger over the
open end of the PCV valve and make sure that intake manifold vacuum
can be felt.
|
4. |
If the vacuum is not felt inspect PCV operation,
if operating correctly clean or replace the vapor hose.
|
Rear Door. Components and Components
Location
Components
1. Rear door trim
2. Rear door seal
3. Rear door panel
4. Rear door delta inner cover
5. Rear door channel
6. Rear door belt inside weatherstrip
7. ...
Removal
1.
Remove the mounting bolt and disconnect the horn connector, then
remove the horn (A).
...
Installation
1.
Installation is the reverse of removal.
•
...