1. |
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
|
2. |
Lift the vehicle.
|
3. |
Disconnect the canister close valve connector (A).
|
4. |
Disconnect the ventilation hose (B) from the fuel
tank air filter and canister close valve.
|
5. |
Remove the fuel tank air filter assembly after removing
a bolt (A).
|
6. |
Remove the bracket (A) after pulling it.
|
7. |
Release the lever (A), and then separate the canister
close valve (B) from the fuel tank air filter (C) after rotating it
in the direction of the arrow in the figure.
|
Installation
•
Install the component with the specified
torques.
•
...
Inspection
Radiator Cap Testing
1.
Remove the radiator cap, wet its seal with engine
coolant, then install it on a pressure tester.
2.
Ap ...
Components and Components Location
Components Location
1. Overdrive clutch (OD/C)
2. One way clutch (OWC)
3. Low & Reverse brake (LR/B)
4. Underdrive brake (UD/B)
5. 26 brake (26/B)
6. 35R ...