Hyundai Accent: Removal
| 1. |
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
|
| 2. |
Disconnect the manifold absolute pressure sensor
connector (A).
|
| 3. |
Remove the installation bolt (B), and then remove
the sensor from the surge tank.
|
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS at idle and
IG ON.
...
Installation
•
Install the component with the specified
torques.
•
...
See also:
Interior light
CAUTION
Do not use the interior lights for extended periods when the engine is
not running. It may cause battery discharge.
WARNING
Do not use the interior lights when driving in the dark. Accide ...
Additional safety precautions
Never let passengers ride in the cargo area or on top of a foldeddown back
seat. All occupants should sit upright, fully back in their seats with their
seat belts on and their feet on the flo ...
Installation
1.
Installation is the reverse of removal.
•
...
Hyundai Accent Manuals
© 2011-2024 Copyright www.hamanual.com