Hyundai Accent: Intake Air Temperature
Sensor (IATS). Schematic Diagrams
Hyundai Accent RB (2010-2018) Service Manual / Engine Control/Fuel System / Engine Control System / Intake Air Temperature
Sensor (IATS). Schematic Diagrams
Circuit Diagram
| (M/T) |
| (A/T) |
Intake Air Temperature
Sensor (IATS). Specifications
Specification
Temperature
Resistance (kΩ)
°C
°F
-40
-40
40.93 ~ 48.35
-20
...
Intake Air Temperature
Sensor (IATS). Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the IATS connector.
3.
Measure resistance between th ...
See also:
Removal and Installation
1.
Disconnect the battery negative terminal first, then
the positive terminal.
Tightening torque
(-) terminal :
4.0 ~ 6. ...
Removal
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three
minutes before beginning ...
PODS-F Zeroing procedure
You should perform PODS-F Re-zero procedure after service or replacement
about all part of the passenger seat. (Not included full seat assembly)
1.
Ignition “OFF” ...
Hyundai Accent Manuals
© 2011-2024 Copyright www.hamanual.com