Circuit Diagram
(M/T) |
(A/T) |
Certification label
The certification label is located on the driver's door sill at the center pillar.
This label shows the maximum allowable weight of the fully loaded vehicle. This
is called the GVWR (Gross Ve ...
Inspection
1.
Disconnect the back up lamp switch connector (A).
2.
Check the continuity between no. 1 and 2 terminals of backup lamp
switch. W ...
Inspection
1.
Check the steering column for damage and deformation.
2.
Check the steering column for damage and deformation.
3.
...