Hyundai Accent: Removal
| 1. |
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
|
| 2. |
Disconnect the engine coolant temperature sensor
connector (A).
|
| 3. |
Supplement the engine coolant (Refer to “Cooling
System” in EM group).
|
Inspection
1.
Turn the ignition switch OFF.
2.
Remove the ECTS (Refer to "Removal").
3.
After immersing the ther ...
Installation
•
Install the component with the specified
torques.
•
...
See also:
2. Evaporative emission control (including ORVR: Onboard Refueling Vapor Recovery)
system
The Evaporative Emission Control System is designed to prevent fuel vapors from
escaping into the atmosphere. (The ORVR system is designed to allow the vapors from
the fuel tank to be loaded into ...
Description and Operation
Description
The 6-spd automatic transaxle consists of an overdrive clutch (OD/C),
a one-way clutch (OWC), a low and reverse brake (LR/B), an underdrive brake
(UD/B), a 26 brake (26/B), and a ...
Interior Trim. Components and Components
Location
Components
1. Front pillar trim
2. Center pillar lower trim
3. Center pillar upper trim
4. Rear pillar trim [4 Door]
5. Rear wheelhousing trim
6. Front door scuf ...
Hyundai Accent Manuals
