Hyundai Accent: Heated Oxygen Sensor (HO2S). Specifications
Hyundai Accent RB (2010-2018) Service Manual / Engine Control/Fuel System / Engine Control System / Heated Oxygen Sensor (HO2S). Specifications
Specification
HO2S [Bank 1/Sensor 1]
|
Item |
Specification |
|
Heater Resistance (Ω) |
2.4 ~ 4.0 [20°C(68°F)] |
HO2S [Bank 1/Sensor 2]
|
A/F Ratio (λ) |
Output Voltage(V) |
|
RICH |
0.6 ~ 1.0 |
|
LEAN |
0 ~ 0.4 |
|
Item |
Specification |
|
Heater Resistance (Ω) |
Approx. 9.0 [21°C(69.8°F)] |
Heated Oxygen Sensor (HO2S). Description and Operation
Description
Heated Oxygen Sensor (HO2S) consists of zirconium and alumina
and is installed both upstream and downstream of the Manifold Catalytic Converter.
The sensor output voltage varies ...
Heated Oxygen Sensor (HO2S). Troubleshooting
Signal Waveform
...
See also:
Manifold Absolute Pressure
Sensor (MAPS). Specifications
Specification
Pressure
[kPa (kgf/cm², psi)]
Output Voltage (V)
20.0 (0.20, 2.9)
0.79
46.7 (0.47, 6.77)
1.84
...
Starter Relay. Repair procedures
Inspection
1.
Remove the fuse box cover.
2.
Remove the starter relay(A).
3.
Using an ohmmeter, check t ...
Reporting safety defects
If you believe that your vehicle has a defect which could cause a crash or could
cause injury or death, you should immediately inform the National Highway Traffic
Safety Administration (NHTSA) in ...
Hyundai Accent Manuals
© 2011-2024 Copyright www.hamanual.com