Hyundai Accent: Inspection
| 1. |
Turn the ignition switch OFF.
|
| 2. |
Disconnect the HO2S connector.
|
| 3. |
Measure resistance between the HO2S terminals 4 and
5 [B1/S1].
|
| 4. |
Measure resistance between the HO2S terminals 3 and
4 [B1/S2].
|
| 5. |
Check that the resistance is within the specification.
|
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Disconnect the connector (A), and then remove the
se ...
See also:
Instrument panel illumination
When the vehicle’s parking lights or headlights are on, press the upper or lower
part of the switch to adjust the brightness of the instrument panel illumination. ...
Removal Of Parts
First find the cause of the problem and then determine whether
removal or disassembly before starting the job.
...
Removal
Engine removal is not required for this procedure.
•
Use fender covers to avoid damaging painted ...
Hyundai Accent Manuals
© 2011-2024 Copyright www.hamanual.com