Hyundai Accent: Removal
| 1. |
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
|
| 2. |
Disconnect the connector (A), and then remove the
sensor (B).
[Bank 1 / Sensor 1]
[Bank 1 / Sensor 2]
|
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the HO2S connector.
3.
Measure resistance between the HO2S termi ...
Installation
•
Install the component with the specified
torques.
•
...
See also:
All season tires
HYUNDAI specifies all season tires on some models to provide good performance
for use all year round, including snowy and icy road conditions. All season tires
are identified by ALL SEASON and/or ...
Room lamp
ON (1):
In the ON position, the light stays on at all times.
DOOR (2) :
In the DOOR position, the light comes on when any door is opened regardless of
the ignition switch position.
When doors ...
Engine compartment fuse replacement
1. Turn the ignition switch and all other switches off.
2. Remove the fuse panel cover by pressing the tab and pulling up.
3. Check the removed fuse; replace it if it is blown. To remove or insert ...
Hyundai Accent Manuals
© 2011-2024 Copyright www.hamanual.com