Hyundai Accent: Rail Pressure Sensor (RPS). Description and Operation

Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in the sensor converts the pressure to voltage signal. By using this signal, the ECM can control correct injection amount and timing and adjusts the fuel pressure with the fuel pressure regulator valve if the target pressure and the actual pressure calculated by the RPS output signal are different.

Installation

• Install the component with the specified torques. • ...

Rail Pressure Sensor (RPS). Specifications

Specification ...

See also:

General Safety Information and Caution
Precautions General Precautions Please read the following precautions carefully before performing the airbag system service. Observe the instructions described in this manual, ...

Intake Air Temperature Sensor (IATS). Specifications
Specification Temperature Resistance (kΩ) °C °F -40 -40 40.93 ~ 48.35 -20 ...

Roof Trim. Repair procedures
Replacement Sunvisor Replacement • When prying with a flat-tip screwdriver, wrap it with ...