Hyundai Accent: Inspection

Hyundai Accent RB (2010-2018) Service Manual / Engine Control/Fuel System / Engine Control System / Rail Pressure Sensor (RPS). Repair procedures / Inspection

1.	Connect the GDS on the Data Link Connector (DLC).

2.

Measure the output voltage of the RPS at idle and various engine speed.

Condition	Output Voltage (V)
Idle	Approx. 1.2
1,500 rpm	2.2 ~ 2.5
6,300 rpm	Approx. 3.0

Rail Pressure Sensor (RPS). Repair procedures

...

Removal

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Release the residual pressure in fuel line (Refer to ...

See also:

Inspection
1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to “Wave Form” ...

Rear Seat. Components and Components Location
Components 1. Headrest [RH] 2. Rear seat back cover [RH] 3. Rear seat back frame assembly [RH] 4. Rear back cover [RH] 5. Headrest [Center] 6. Headrest [LH] 7 ...

Digital clock
WARNING Do not adjust the clock while driving. You may lose your steering control and cause an accident that results in severe personal injury or death. Whenever the battery terminals or related ...

Hyundai Accent Manuals

© 2011-2024 Copyright www.hamanual.com