Hyundai Accent: Injector. Description and Operation

Based on information from various sensors, the ECM can calculate the fuel amount to be injected. The fuel injector is a solenoid-operated valve and the fuel injection amount is controlled by length of injection time. The ECM controls each injector by grounding the control circuit. When the ECM energizes the injector by grounding the control circuit, the circuit voltage should be low (theoretically 0V) and the fuel is injected. When the ECM de-energizes the injector by opening control circuit, the fuel injector is closed and circuit voltage should momentarily peak, and then settle at system voltage.

Installation

• Install the component with the specified torques. • ...

Injector. Specifications

Specification Item Specification Coil Resistance (Ω) 1.5 [20°C(68°F)] ...

See also:

Installation
1. Connect the audio unit connectors and cable. 2. Install the audio unit. 3. Install the crash pad center fas ...

Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the hydraul ...

Installation
1. Install the high mounted stop lamp. 2. Install the trunk trim. ...