1. |
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
|
2. |
Disconnect the CVVT oil control valve connector (A).
|
3. |
Remove the installation bolt (B), and then remove
the valve from the engine.
[Bank 1 / Intake]
[Bank 1 / Exhaust]
|
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the oil temperature sensor connector.
3.
Measure resistance between ...
Adjustment
1.
Install the selected cable (B) to the selected lever (A) of the
manual transaxle in engine room.
2.
Assemble the shift lever ass ...
Back-up Lamp Switch. Description and Operation
Description
Back up lamp switch is pushed by the reverse lug sliding when select arm,
and switches the back up lamp.
...