Hyundai Accent Manuals

Hyundai Accent: Removal - Canister Close Valve (CCV). Repair procedures - Engine Control System - Engine Control/Fuel SystemHyundai Accent: Removal

Hyundai Accent RB (2010-2018) Service Manual / Engine Control/Fuel System / Engine Control System / Canister Close Valve (CCV). Repair procedures / Removal

1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Lift the vehicle.
3.
Disconnect the canister close valve connector (A).
4.
Disconnect the ventilation hose (B) from the fuel tank air filter and canister close valve.
5.
Remove the fuel tank air filter assembly after removing a bolt (A).
6.
Remove the bracket (A) after pulling it.
7.
Release the lever (A), and then separate the canister close valve (B) from the fuel tank air filter (C) after rotating it in the direction of the arrow in the figure.

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the CCV connector. 3. Measure resistance between the CCV termina ...

Installation
• Install the component with the specified torques. • ...

See also:

Circuit Diagram
...

Disassembly
Identify MLA(Mechanical lash adjuster), valves, valve springs as they are removed so that each item can be reinstalled in ...

Components
1. Driver Airbag (DAB) 2. Steering Wheel 3. Clock Spring 4. Passenger Airbag (PAB) 5. Side Airbag (SAB) 6. Curtain Airbag (CAB) 7. Seat Belt Pretensioner ( ...

Hyundai Accent Manuals


© 2011-2024 Copyright www.hamanual.com