1. |
Release the residual pressure in fuel line (Refer
to “Release Residual Pressure in Fuel Line” in this group).
|
2. |
Remove the rear seat [LH] (Refer to “Seat” in BD
group).
|
3. |
Remove the fuel pump service cover (A).
|
4. |
Disconnect the fuel pump connector (A).
|
5. |
Disconnect the fuel feed tube quick connector (B).
|
6. |
Disconnect the fuel tank pressure sensor connector
(C).
|
7. |
Disconnect the vapor tube (D).
|
8. |
Lift the vehicle and support the fuel tank with a
jack.
|
9. |
Remove the center muffler assembly (Refer to “Intake
And Exhaust System” in EM group).
|
10. |
Disconnect the fuel filler hose (A) and the vapor
hose (B).
|
11. |
Remove the parking brake line installation bolt (A).
|
12. |
Remove the fuel tank from the vehicle after removing
the fuel tank band (A).
|
Installation
1.
Installation is the reverse of removal.
•
...
Cowl Top Cover. Repair procedures
Replacement
1.
Remove the wiper arm cap (B) and remove the nuts, then remove
wiper arm (A).
Tighening torque :
22.6 ~ 26.5 Nm (2.3 ~ ...
Installation
Side Impact Sensor
•
Do not turn the ignition switch ON and do not connect
the battery c ...