Hyundai Accent: Removal

Hyundai Accent RB (2010-2018) Service Manual / Engine Control/Fuel System / Fuel Delivery System / Filler-Neck Assembly. Repair procedures / Removal

1.	Open the fuel filler door, and then remove the filler-neck assembly mounting screws (A).

2.	Disconnect the fuel filler hose (A) and tue vapor hose (B).

3.	Remove the filler-neck assembly from the vehicle after removing the bracket mounting bolt (A).

Filler-Neck Assembly. Repair procedures

...

Installation

1. Installation is reverse of removal. Filler-neck assembly bracket installation nut : 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 ...

See also:

Curtain Airbag (CAB) Module. Components and Components Location
Components ...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the variable intake solenoid valve connector ...

Record your key number
The key code number is stamped on the bar code tag attached to the key set. Should you lose your keys, this number will enable an authorized HYUNDAI dealer to duplicate the keys easily. Remove t ...

Hyundai Accent Manuals

© 2011-2024 Copyright www.hamanual.com