1. Before closing the hood, check the following:
2. Return the support rod to its clip to prevent it from rattling.
3. Lower the hood until it is about 1 ft. (30 cm) above the closed position and let it drop. Make sure that it locks into place.
WARNING
Inspection
1.
Inspect the check valve in the vacuum hose.
Do not remove the check valve f ...
Vehicle identification number (VIN)
The vehicle identification number (VIN) is the number used in registering your
car and in all legal matters pertaining to its ownership, etc.
The number is punched on the floor under the front pa ...
Removal and Installation
1.
Disconnect the battery negative terminal first, then
the positive terminal.
Tightening torque
(-) terminal :
4.0 ~ 6. ...