1. |
Remove the transaxle assembly. (Refer to "Manual
transaxle system" in MT group)
|
2. |
Remove the clutch cover bolts. Be careful not to
be bent ortwist bolts. Loosen bolts in diagonal directions.
|
Interior E ( 5Door )
Front pillar trim mounting hole (Ø8.5)
Front pillar trim mounting hole (Ø8)
Cowl cross ...
Mirror. Repair procedures
Replacement
Outside Rear View Mirror Assembly Replacement
•
When prying with a flat-tip screwd ...
Installation
1.
Installation is the reverse of removal.
2.
Use a SST (09580-0U000) when installing the brake caliper assembly.
...