1. |
Inspect diaphragm spring wear which is in contact
with a concentric slave cylinder bearing.
|
2. |
Check the clutch cover and disc surface for wear
or cracks.
|
3. |
Check the clutch disc lining for slipping or oil
marks.
|
4. |
Measure the depth from a clutch lining surface to
a rivet. If the measured value is less than the specification below,
replace it.
|
Valve Body. Components and Components Location
Components Location
1. PCV adjust screw
2. Solenoid valve
3. Oil temperature sensor
4. Accumulator
5. Low & reverse brake(LR/B) pressure flow hole
6. Und ...
Installation
1.
Installation is the reverse of removal.
A.
...
Special Service Tools
Special Service Tools
Tool (Number and name)
Illustration
Use
Crankshaft front oil seal installer
(09455-21200)
Ins ...