If reinstalling used cover, the cover should be installed
with its clutch disc as a set.
|
1. |
Replace a clutch cover and disc as a set.
|
2. |
Apply grease on a disc spline part and transmission
input shaft spline part as required.
|
3. |
The 'T/M SIDE' marked surface should face the transmission.
|
4. |
Install the clutch disc and the cover with SST(A
: 09411-1P000).
|
5. |
Install the clutch cover bolts. Not to be bent or
twisted, Tighten them in diagonal directions.
|
6. |
Install the transaxle assembly.
(Refer to "Manual transaxle system" in MT group)
|
Removal
1.
Remove the battery and the battery tray.
(Refer to "Charging system" in EE group)
2.
Remove the under cover (A).
...
Removal
1.
Turn ignition switch OFF.
2.
Pull up the lock of the HECU connector (A), and then disconnect
the connector.
...
Care of disc
If the temperature inside the car is too high, open the car windows for
ventilation before using your car audio.
It is illegal to copy and use MP3/WMA files without permission. Use CDs
that ...