Shift Lever Assembly Replacement |
1. |
Remove the floor Interior console assembly.
(Refer to "Interior (Console)" in BD group)
|
2. |
Remove the select cable snap pin (A) and the clip (B) from the
select cable assembly.
|
3. |
Remove the clip (A) from the shift cable assembly.
|
4. |
Remove the shift lever assembly (B) after removing shift lever
assembly installation bolts (A-4ea).
|
5. |
Installation is the reverse of removal.
|
Shift Cable Replacement |
1. |
Remove the floor Interior console assembly.
(Refer to "Interior(Console)" in BD group)
|
2. |
Remove the select cable snap pin (A) and the clip (B) from the
select cable assembly.
|
3. |
Remove the clip (A) from the shift cable assembly.
|
4. |
Remove the retainer (A) and nuts (B-2ea).
|
5. |
Remove the pins (A).
|
6. |
Remove the cable (B) from the cable bracket at manual transaxle
assembly side.
|
7. |
Remove the shift cable and select cable at cabin room.
|
Brake Booster Operating Test
For simple checking of the brake booster operation, carry out the following
tests.
1.
Run the engine for one or two minutes, and then stop it. If the
pedal depresses ...
Closing the hood
1. Before closing the hood, check the following:
All filler caps in engine compartment must be correctly installed.
Gloves, rags or any other combustible material must be removed from the
eng ...
Starter. Components and Components
Location
Components
1. Screw
2. Front bracket
3. Stop ring
4. Stopper
5. Overrun clutch
6. Lever
7. Lever plate
8. Lever packing
9. Magnet switch
10. Arma ...