Hyundai Accent: Adjustment

Hyundai Accent RB (2010-2018) Service Manual / Manual Transaxle System (M6CF1) / Manual Transaxle Control System / Shift Lever. Repair procedures / Adjustment

1.	Install the selected cable (B) to the selected lever (A) of the manual transaxle in engine room.

2.	Assemble the shift lever assembly (A) to the vehicle body.

3.

Install the following items;

(1)	Insert the selected cable (A) to the shift lever assembly pin(B).

(2)	Install the snap pin (C).

(3)	Be careful the shift lever not to move left or right side, push the lock piece (D) until sounds.

(4)	You have to push in the adjust (E).

(5)	Remove the neutral position pin (F).

Installation

1. Installation is the reverse of removal. ...

Back-up Lamp Switch. Description and Operation

Description Back up lamp switch is pushed by the reverse lug sliding when select arm, and switches the back up lamp. ...

See also:

Description and Operation
Description The starting system includes the battery, starter, solenoid switch, inhibitor switch (A/T), ignition switch, ignition lock switch, connection wires and the battery cable. Whe ...

26 Brake Control Solenoid Valve(26/B_VFS). Description and Operation
Description 26 brake control solenoid valve(26/B_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 26 brake. ...

Installation
1. Install the high mounted stop lamp. 2. Install the trunk trim. ...

Hyundai Accent Manuals

© 2011-2024 Copyright www.hamanual.com