1. |
Disconnect the back up lamp switch connector (A).
|
2. |
Check the continuity between no. 1 and 2 terminals of backup lamp
switch. When the shift lever is in reverse, there should be continuity.
|
3. |
If necessary, repair or replace the backup lamp switch.
|
Interior D ( 4Door )
Seatbelt height adjust upper mounting hole (Ø15)
Seatbelt height adjust lower mounting hole (Ø15)
...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the steering column upper (A) and lower (B) shrouds after
removing 3 screws.
...
Steering Angle Sensor. Description and Operation
Description
The steering angle speed sensor detects the angle of the steering wheel
in order to which direction a user chooses.The sensor is detached on the MPS(Mutil-Function
Switch) under ...